|Welcome to Saab92x.com!|
I've been told my ecu is locked, did successfully marry and divorce an accessport. Now trying to prepare my usdm ecu for NYS inspection, find myself unable to force ready and disable TGV codes, please take a look on my link and offer advice if you are able to help.
Thank you, Happy New Year!
Help with 05 WRX usdm rom OBD-II
http://forums.nasioc.com/forums/showthr … ?t=2821662
Looks like switching to the AT map is an AP quirk http://romraider.com/forum/viewtopic.php?f=15&t=539
You can get the 05 MT map from here (A4TF800E) http://www.romraider.com/forum/viewtopi … amp;t=7591
In EcuFlash to change the values for enabled/disabled you need to click the box with the word "enabled/disabled" and hit the ']' or '[' to increment/decrement them (or use the drop down from the Edit menu).
Took the couple minutes to grab that map and make the changes for force readiness, cat readiness, TGV CEL fixes, misfire CEL fix and also disabled the P0420 (cat efficiency) code just for good measure. https://www.dropbox.com/s/m50ueetaklwww … n.srf?dl=0
Bin version: https://www.dropbox.com/s/niyh94sm7l57g … n.bin?dl=0
It's saved as a .srf so in EcuFlash you just change the filetype in the menu to look for that type and you should be all set. Make sure you've got a good charge when flashing and you should be all set! Happy new year
Last edited by countriccati (2017-01-01 12:04:17)
Thanks dude, check engine light is gone
You are awesome.